Description
The hydraulic distributor P80 is used for switching on/off and directing the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tank. It is manufactured with up to 6 plungers with parallel or serial distribution.
Construction
The hydraulic distributor P80 is a mono-bloc distributor with manual control. The body is made of cast iron EN-GJL300, and the spools are made of carburized steel with hard chrome plating.
Mounting
The distributor is fixed with 3 (three) bolts M8.
Ambient temperature | -80C...+60C |
Viscosity | 12 ...800 mm2/s |
Fluid temperature | -15C...+80C |
Filtration | 10 to NAS 1638 |
Max operating pressure | 315 bar |
Back pressure | 50 Bar |
Nominal flow | 80 l/min |
Leakage(A,B-T) | 18cm3/min at 120bar |
Spool stroke | +/- 7 mm |
Actuating force | < 220 N |
Modification/ Spools | with 1 to 6 |
Note: All Distribution Product is only for Domestic Market.